Bradley S19-690H Portable Heated Pressurized Eyewash Station

The Bradley S19-690H portable eyewash features a thermostatically controlled heater jacket.

The Bradley insulated heater jacket thermostatically controls the water in temperatures down to -10 degrees F (-23 degrees C) to prevent freezing. It makes use of a 120VAC standard grounded power cord and operates by activating the highly visible push handle. The yellow-colored insulated jacket is made using foam-backed 200 Denier nylon Oxford and features a clear vinyl-crafted pocket to allow electrical connections. It has an eyewash yoke with pipe insulation and comes wrapped with a heat trace cable for freeze protection.

The Bradley S19-690H pressurized portable eyewash unit may be used to supplement permanent eyewash fixtures. It has a 10-gallon capacity stainless steel tank measuring 24 3/8 inches (619mm) high and 12 1/4 inches (311mm) in diameter.
The twin ANSI Z358.1 compliant eyewash heads are made of chrome-plated brass, and the tank features a tire-filler valve with a 0 to 160PSI air gauge.

• Eyewash has 15 minutes of flow
• UL classified for ANSI Z358.1 compliance
• Concentrate not included with tank

Features

• Meets or exceeds ANSI/ISEA Standard Z358.1 (Except 5-gallon units)
• HR Models can retrofit to any Bradley pressurized tank with eye wash option only (without drench hose option)
• Prevents freezing down to -10 degrees F
• Secondary thermostat with manual reset prevents over heating of water